UBIQUITI Access Point U7 PRO MAX

The Ubiquiti UniFi Access Point U7 Pro Max (Model: U7-Pro-Max) specification description follows:

The Ubiquiti UniFi Access Point U7 Pro Max (Model: U7-Pro-Max) is a flagship, high-density Wi-Fi 7 (802.11be) access point engineered to deliver multi-gigabit wireless performance, massive client capacity, and real-time spectral intelligence for enterprise networks, auditoriums, and high-concurrency environments. Powered by quad-radio Wi-Fi 7 architecture with a dedicated spectral analysis engine, the access point provides low-latency, high-speed wireless connectivity across 2.4 GHz, 5 GHz, and 6 GHz spectrum bands.

Featuring 8 spatial streams—comprising 2x2 MIMO on 2.4 GHz, 4x4 MIMO on 5 GHz, and 2x2 MIMO on 6 GHz—the U7 Pro Max delivers an aggregated wireless throughput of up to 14.7 Gbps. Equipped with a high-speed 2.5 GbE uplink port with PoE+ input, it incorporates multi-link operation (MLO), 320 MHz channel support on 6 GHz, integrated directional antenna design with real-time Spectral Scan capabilities, and seamless integration into the UniFi Network Application.

Comprehensive Key Features:

• Quad-Radio Wi-Fi 7 Enterprise Performance: Operates simultaneous radios across 2.4 GHz, 5 GHz, and 6 GHz bands alongside a dedicated spectral analysis radio.
  
• 14.7 Gbps Aggregate Wireless Throughput: Delivers 688 Mbps on 2.4 GHz, 8648 Mbps on 5 GHz, and 5765 Mbps on 6 GHz for high-bandwidth application demands.
  
• 8 Spatial Stream MIMO Architecture: Features 2x2 MIMO on 2.4 GHz, 4x4 MIMO on 5 GHz, and 2x2 MIMO on 6 GHz to serve over 500 concurrent client devices.
  
• Ultra-Wide 320 MHz Channels & 4K-QAM: Utilizes 320 MHz channel widths on the 6 GHz spectrum and 4096-QAM modulation for maximum data throughput.
  
• Dedicated Spectral Scan Engine: Built-in dedicated radio continuously analyzes RF interference and optimizes channel selection in real time without interrupting client traffic.
  
• Multi-Link Operation (MLO) Support: Enables client devices to transmit and receive data concurrently across multiple frequency bands for ultra-low latency and higher reliability.
  
• 2.5 GbE Multi-Gigabit PoE+ Uplink: Equipped with (1) 2.5 GbE RJ45 port supporting 802.3at PoE+ input to eliminate wired backhaul bottlenecks.
  

Extended Technical Specifications:

1. Hardware & Physical Parameters:
   

• Model / SKU: U7-Pro-Max (UniFi Access Point U7 Pro Max)
  
• Dimensions: Ø206 x 46 mm (Ø8.11 x 1.81")
  
• Weight: 680 g (1.50 lb) | With Mounting Bracket: 800 g (1.76 lb)
  
• Enclosure Material: Polycarbonate, Aluminum Alloy
  
• Mount Material: SGCC Steel Wall / Ceiling Mounting Plate (Included)
  
• Status LEDs: System Status Ring (RGB)
  
• Buttons: Factory Reset
  

1. Wireless, Networking & Performance Parameters:
   

• Wi-Fi Standards: 802.11a/b/g/n/ac/ax/be (Wi-Fi 6/6E/7)
  
• Spatial Streams: 8 Total Streams | 2.4 GHz: 2x2 | 5 GHz: 4x4 | 6 GHz: 2x2
  
• Radio Bands & Max. Rates: 2.4 GHz: 688 Mbps | 5 GHz: 8648 Mbps | 6 GHz: 5765 Mbps
  
• Antenna Gain: 2.4 GHz: 4 dBi | 5 GHz: 6 dBi | 6 GHz: 5.8 dBi
  
• Max. TX Power: 2.4 GHz: 22 dBm | 5 GHz: 26 dBm | 6 GHz: 23 dBm
  
• Concurrent Clients: 500+ Active Clients
  
• Networking Interface: (1) 1/2.5 Gbps Ethernet RJ45 Port
  
• Wireless Security: WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
  

1. Electrical & Environmental Parameters:
   

• Power Method: 802.3at PoE+ (Pairs 1, 2+; 3, 6- or Pairs 4, 5+; 7, 8-)
  
• Power Supply: 48V PoE+ Switch or 2.5G PoE Injector (Not Included)
  
• Max. Power Consumption: 22W
  
• Supported Voltage Range: 44 to 57V DC
  
• ESD/EMP Protection: Air: ±16 kV, Contact: ±12 kV
  
• Ambient Operating Temperature: -30 to 60° C (-22 to 140° F)
  
• Ambient Operating Humidity: 5 to 95% noncondensing
  
• Regulatory Certifications: CE, FCC, IC