The Ubiquiti UniFi 7 Pro Wall (Model: U7-Pro-Wall) is an enterprise-grade wall-mounted Wi-Fi 7 access point designed for discreet, high-density wall installations. Built upon the IEEE 802.11be standard, the U7-Pro-Wall delivers multi-gigabit wireless performance, leveraging 320 MHz channel bandwidth on the 6 GHz band, 4096-QAM modulation, and Multi-Link Operation (MLO) to minimize latency and optimize performance across dense client environments.
Designed to replace standard wall outlets or mount directly onto wall surfaces, the U7-Pro-Wall optimizes RF radiation patterns specifically for directional in-room coverage, reducing inter-room interference in multi-room configurations. It features a high-speed 2.5 GbE RJ45 uplink port to maximize throughput and eliminate gigabit backhaul bottlenecks. Fully integrated with the UniFi Network Controller, the access point supports dynamic spectrum management, automated RF optimization, visual topology mapping, and isolated guest network configurations.
Comprehensive Key Features:
Next-Generation Wi-Fi 7 Performance: Full tri-band operation (6 GHz, 5 GHz, and 2.4 GHz) delivering aggregate speeds up to 9.3 Gbps.
320 MHz Channel Width & 4096-QAM: Utilizes ultra-wide 320 MHz spectrum on 6 GHz and 4K-QAM modulation for maximum data density.
Multi-Link Operation (MLO): Enables multi-band simultaneous client transmission for ultra-low latency and higher reliability.
Wall-Mounted Form Factor: Sleek, flush-mount design tailored for in-room coverage in hospitality, MDUs, and office spaces.
2.5 GbE Uplink Port: Features a single 2.5 Gigabit Ethernet RJ45 port for multi-gigabit wired backhaul.
High Concurrent Capacity: Designed to support 300+ concurrent client connections without performance degradation.
Powered via 802.3at PoE+: Runs on standard 802.3at Power over Ethernet for simple, single-cable deployment.
Centralized UniFi Integration: Complete remote management, dynamic channel optimization, and traffic monitoring via UniFi Network.
Extended Technical Specifications:
1. Hardware & Wireless RF Architecture:
Model / SKU: U7-Pro-Wall (UniFi 7 Pro Wall)
Wi-Fi Standards: IEEE 802.11a/b/g/n/ac/ax/be (Wi-Fi 7)
Frequency Bands & Spatial Streams:
6 GHz Band: 2x2 802.11be (320 MHz Channel Width)
5 GHz Band: 2x2 802.11be (240 MHz / 160 MHz Channel Width)
2.4 GHz Band: 2x2 802.11be (40 MHz Channel Width)
Max. Data Rates:
6 GHz Band: Up to 5.7 Gbps
5 GHz Band: Up to 2.8 Gbps
2.4 GHz Band: Up to 688 Mbps
Antenna Gain:
6 GHz: 6.0 dBi
5 GHz: 5.0 dBi
2.4 GHz: 4.0 dBi
Max. TX Transmit Power:
6 GHz: 23 dBm
5 GHz: 26 dBm
2.4 GHz: 22 dBm
Concurrent Client Capacity: 300+ Active Clients
BSSID Support: Up to 8 SSIDs per radio
2. Physical Interfaces, Power & Environmental:
Networking Interface: (1) 2.5 GbE RJ45 Port (2.5G/1G/100M)
Management Interface: Ethernet / UniFi Network Software
Power Method: 802.3at PoE+ (44–57V DC)
Power Supply: UniFi PoE Switch or 48V, 0.5A 2.5G PoE Adapter (Not Included)
Max. Power Consumption: 22 W
Enclosure Materials: Polycarbonate, Aluminum Alloy Baseplate
Mounting: Included Wall / Outlet Mounting Bracket
Operating Temperature: -30°C to 60°C (-22°F to 140°F)
Operating Humidity: 5% to 95% non-condensing
Certifications: CE, FCC, IC
| brand | Ubiquiti |