UBIQUITI Lightweight, compact 60ghz PtmP Statio wave picon powered by wave tecnology wave pico

The Ubiquiti Wave Pico 60 GHz Wave Technology PtMP Station (Model: Wave-Pico) specification description follows:

The Ubiquiti Wave Pico (Model: Wave-Pico) is an ultra-compact, lightweight 60 GHz PtMP (Point-to-MultiPoint) Station designed to deliver multi-gigabit wireless connectivity as a subscriber module in high-density last-mile broadband networks. Powered by Ubiquiti’s proprietary Wave Technology, the device enables high-throughput, low-latency client connections over short-to-medium ranges, serving as an ideal solution for urban, suburban, and enterprise Wireless Internet Service Provider (WISP) deployments.

Equipped with a high-gain integrated antenna operating in the 60 GHz spectrum, the Wave Pico features an integrated 5 GHz backup radio with auto-failover capabilities to ensure uninterrupted link availability during severe weather precipitation. Managed centrally via the Ubiquiti ISP (UISP) platform, it features a Gigabit RJ45 Ethernet interface with Passive Power over Ethernet (PoE) support, integrated alignment LEDs, and a ultra-lightweight, weather-resistant enclosure for fast, low-profile outdoor installation.

Comprehensive Key Features:

• 60 GHz Wave Technology Engine: Delivers multi-gigabit Wireless PtMP Station performance with low-latency transmission for high-density last-mile connections.
  
• Integrated 5 GHz Backup Radio: Automatic 5 GHz radio failover preserves network link continuity during severe rain fade and signal attenuation events.
  
• Multi-Gigabit Throughput Capacity: Supports up to 2 Gbps total duplex throughput (1 Gbps RX / 1 Gbps TX) across the 60 GHz band.
  
• Ultra-Compact & Lightweight Design: Low-profile form factor minimizes tower wind loading and visual impact for subtle building and pole mounting.
  
• Integrated GPS & Alignment LEDs: Built-in GPS receiver for precision network synchronization alongside visual LED indicators for real-time antenna alignment.
  
• Centralized UISP Integration: Fully managed through the UISP software platform for remote provisioning, live signal monitoring, and network mapping.
  
• Weatherproof Outdoor Construction: Durable, UV-stabilized polycarbonate enclosure engineered for outdoor site deployments and extreme temperature resilience.
  

Extended Technical Specifications:

1. Hardware & Physical Parameters:
   

• Model / SKU: Wave-Pico (Wave Pico 60 GHz Station)
  
• Dimensions: 152 x 152 x 40 mm (5.98 x 5.98 x 1.57")
  
• Weight: 400 g (0.88 lb)
  
• Enclosure Material: UV-Stabilized Polycarbonate
  
• Mounting: Pole Mount / Wall Mount (Kit Included)
  
• Status LEDs: Power, Ethernet Link, Signal Strength / Alignment
  
• System Memory: 256 MB DDR3
  

1. Wireless, Networking & Performance Parameters:
   

• 60 GHz Operating Frequency: 57,000–71,000 MHz (Region Dependent)
  
• 5 GHz Backup Frequency: 5150–5875 MHz (Region Dependent)
  
• Antenna Gain: 60 GHz: 35 dBi | 5 GHz: 12 dBi
  
• Max. Throughput Rate: 2 Gbps Duplex (1 Gbps RX / 1 Gbps TX)
  
• Max. Range: Up to 1.3 km (0.8 miles)
  
• Channel Bandwidth: 60 GHz: 2160, 1080 MHz | 5 GHz: 20, 40, 80 MHz
  
• Networking Interfaces: (1) 10/100/1000 Mbps Gigabit Ethernet RJ45 Port
  
• Management Interfaces: UISP Application, Bluetooth, Local Web UI
  

1. Electrical & Environmental Parameters:
   

• Power Method: 24V DC Passive PoE (Pairs 4, 5+; 7, 8-) or 48V DC Passive PoE
  
• Power Supply: 24V, 0.5A Gigabit PoE Adapter (Included)
  
• Max. Power Consumption: 9.5W
  
• Supported Voltage Range: 24V DC ±10% or 48V DC ±10%
  
• ESD/EMP Protection: Air: ±8 kV, Contact: ±6 kV
  
• Ambient Operating Temperature: -40 to 60° C (-40 to 140° F)
  
• Ambient Operating Humidity: 5 to 95% noncondensing
  
• Regulatory Certifications: CE, FCC, IC